Product features
The KT200 shrink masonry sleeve consists of a polyolefin tube with an internal metal reinforcement. The corrugated surface is coated with sealing material that forms a durable, longitudinally waterproof connection with wet concrete or mortar. Both ends are internally coated with sealing adhesive. When heated, e.g., with an open gas flame, the ends shrink – whereby the sealing adhesive melts and is pressed into cavities or unevenness – and gas- and moisture-tight onto the cable or pipe. The two openings are closed with caps in the delivery condition, so the masonry sleeve can be pre-assembled. Furthermore, the special design allows the pipe or cable to be replaced later without new drilling.
Special features
• Flexible – can be bent up to 30°.
• Simple and fast assembly – the masonry sleeve consists of a single part.
• Economical storage – only six sizes are needed for pipe or cable outer diameters 8 to 140 mm due to the large shrink range.
Specifications & Downloads
- Downloads
- KT-200-Mauerdurchfuehrung.pdf
Filter
| Amount | Item No. | Description | E-Number | On stock | EAN | Cable diameter | Length | Inner diameter before heat-shrink | Inner diameter after heat-shrink | VE | Unit |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
KT-200-16/8-EPAF-2004 | 052017-000 | 122470000 |
|
7611971027687 | 14mm | 0.7m | 16mm | 8mm | 5 | Stk |
|
|
KT-200-41/16-EPAF-2010 | 451347-000 | 122470200 |
|
7611971027700 | 36mm | 0.8m | 41mm | 16mm | 10 | Stk |
|
|
KT-200-28/10-EPAF-2008 | 455304-000 | 122470100 |
|
7611971027694 | 25mm | 0.7m | 28mm | 10mm | 20 | Stk |